Soil Compaction

Drums are conquering the earth

Nature doesn’t always provide the ideal foundation for the construction of roads: natural rock. In the majority of cases, the ground is unstable, offering insufficient bearing capacity. Earthmoving operations are therefore usually the first step in the construction of a new road. When the course has been defined and set out, the ground underlying the new road needs to be prepared.

Strengthen resistance

Compaction is the single most important process in soil construction. Its job is to reduce the volume of pores in the soil to be compacted, which are filled with water and air. Compaction will give soil the desired properties: Its resistance to stresses induced by traffic and climate will be improved by increasing its stability while simultaneously reducing its tendency to swell due to water absorption. The latter will additionally make the soil resistant to frost.

“HAMM offers an extensive range of products for all areas of earthworks and stands for sophisticated machine and compaction technology.”

HAMM Compactors
Cohesive and non-cohesive soils

The process is different for different types of soil. Experts distinguish between cohesive and non-cohesive soils. In cohesive soils like loam, clay or silt, the particles in the soil bond to one another. In non-cohesive soils like gravel or sand, the particles lie side by side without bonding. Soil types can be distinguished as follows in terms of compactability: water-retaining soils, fine grained cohesive soils, coarse grained non-cohesive soils, fine and coarse grained mixed soils, and rock.

Dynamic compaction is highly effective

Dynamic compaction with vibrating or oscillating rollers has proved particularly effective in earthworks, as it compacts the soil through the combination of vibrations from the roller drum and the weight of the roller.

Compaction requires more than just weight

The intensity of compaction is governed by three influencing factors: displacement of the roller drum, meaning the amplitude of the vibration or oscillation, rate of recurrence of the vibration or oscillation, meaning the frequency, and duration, meaning the roller’s travel speed. When these parameters are set correctly, the specified density can be achieved in considerably less roller passes.

Rubber-tyred roller GRW 280: With this machine, Hamm newly defined the rubber-tyred rollers featuring perfect visibility, intuitive operation and an extremely flexible ballast design.

The right technique for any type of soil

Cohesive soils are best compacted using compactors with padfoot roller drums and high amplitudes, while non-cohesive soils are more effectively compacted with smooth roller drums and lower amplitudes. The ground is then ready to be paved – provided that it does not still contain too much moisture. In that case, it must additionally be stabilized.

Benefits

High load-bearing capacity

Prevents settlements

Cost Efficiency

News & Job Reports

Oscillation by HAMM

The oscillation system developed by HAMM achieves compaction results that are scientifically proven to be more homogeneous and higher-quality, leading to faster, more significant compaction increases.

Oscillation by HAMM

HAMM Compaction Quality (HCQ)

HAMM Compaction Quality comprises a number of HAMM products designed to measure, monitor, document and control compaction processes.

HAMM Compaction Quality (HCQ)

John Deere Construction Equipment

To John Deere Construction Website

Soil and rock construction

Back to overview
白小姐~码中特